Will Gecko 320 will run this servo ?

I find this used servo ! will gecko 320 run it ? which will be its
performances ?

Voltage Gradient No Load : 45 Volts/1000rpm
Max. terminal Voltage : 180 Volts
Max. Speed : 4000 rpm
Continuous Stall TorqueTENV (Heat Sink Rating) : 75 lb-in
Continuous Stall Torque Blower Cooled : 140 lb-in
Continuous Stall Current TENV : 20 Amps
Armature Polar Moment of Inertia : 0.094 lb-in sec2
Torque Constant Kt : 7.5 lb-in/Amp
Voltage Constant Kv : 0.42 Volts sec rad-1
Peak Stall Torque : 440 lb-in
Current at Peak Torque : 130 Amps
Theoretical Acceleration at Peak Torque: 4500 Rad/sec2
Winding
Armature Resistance Less Brushes : 0.2 Ohms
Armature Inductance: 1.2 Millihenrys
Mechanical Time Constant : 17 milliseconds