CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Re: Dead VFD

on 2003-12-07 07:06:40 UTC
> From: Jon Elson
>
> ....
> >He suspects that he needs to add a braking resister ...
> >
> >
> Yes, that is a good idea. I have put a braking resistor on both my mill
and
> lathe VFD's. Especially on the lathe, due to the large inertia of the
chuck,
> it is really needed. It stops my lathe spindle in less than one second.
> ....
>
> Jon

Thanks Jon, I'll pass that on ... and add one to my VFDs :-)

Cheers,

Chuck Hackett
"Good judgment comes from experience, experience comes from bad judgment"
7.5" gauge Union Pacific Northern (4-8-4) 844
http://www.whitetrout.net/Chuck

Discussion Thread

Egroupscdh (E-mail) 2003-11-21 08:09:39 UTC Dead VFD Jon Elson 2003-11-21 10:11:45 UTC Re: [CAD_CAM_EDM_DRO] Dead VFD jmkasunich 2003-11-24 06:31:50 UTC Re: Dead VFD Egroupscdh (E-mail) 2003-12-06 18:49:34 UTC RE: [CAD_CAM_EDM_DRO] Re: Dead VFD Jon Elson 2003-12-06 22:35:03 UTC Re: [CAD_CAM_EDM_DRO] Re: Dead VFD Egroupscdh (E-mail) 2003-12-07 07:06:40 UTC RE: [CAD_CAM_EDM_DRO] Re: Dead VFD