CAD CAM EDM DRO - Yahoo Group Archive

Re: Need to synchronise my two X axis servo or stepper motor ! (Bob Campbell)

on 2003-12-15 07:32:39 UTC
Thanks for your answer Bob !

Will I choose stepper or servo ? To my mind servo will be better
because of closed loop !
How can I choose servo and encoder if I want to use Gecko 320 and
have an equivalent of my 720 oz-in steppers ? (my gantry is 10'x5')
I will use ballscrews to drive my axis. What can you advise me ?
Can you ship your breakout board to France ?

Thanks
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Robert Campbell" <bob@c...>
wrote:
> Anthony,
>
> The commercial systems use slaving. If I were going to build a
large gantry
> CNC router, I would use Mach2 and slaving on the X axis.
>
> Bob Campbell
> http://www.campbelldesigns.com
> Breakout Boards
> VisualMill 5.0 basic
> ----- Original Message -----
> From: "anthony_annicchiarico" <anthony_annicchiarico@y...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Saturday, December 13, 2003 9:34 AM
> Subject: [CAD_CAM_EDM_DRO] Need to synchronise my two X axis servo
or
> stepper motor !
>
>
> > I'm looking for a reliable solution to synchronise the two motors
> > (running with Gecko)which drives my X axis.
> >
> > Is Mach 2 slaving axis method reliable ? I don't want my Y axis
> > blocking !
> >
> > Does it exist another method ?
> >
> > Thanks for your help
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
wanliker@a...,
> timg@k...
> > Moderator: pentam@c... indigo_red@q... [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to
reach it if
> you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this
to be a
> sister site to the CCED group, as many of the same members are
there, for OT
> subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >

Discussion Thread

anthony_annicchiarico 2003-12-13 10:18:32 UTC Need to synchronise my two X axis servo or stepper motor ! Robert Campbell 2003-12-13 10:34:10 UTC Re: [CAD_CAM_EDM_DRO] Need to synchronise my two X axis servo or stepper motor ! anthony_annicchiarico 2003-12-15 07:32:39 UTC Re: Need to synchronise my two X axis servo or stepper motor ! (Bob Campbell)