Re: [CAD_CAM_EDM_DRO] DynaMyte2400

Those machines usually fetch a pretty good price. I think they are
pretty small for what you pay. If it were my decision, I think I'd find
something bigger. I don't know that you would gain a lot because it is
already a CNC machine. I might be wrong though.

Kim

On Thu, 2003-12-18 at 10:53, RichD wrote:
> Bengt,
> Most folks strip all the electronics out and substitute modern PC
> controls and cad/cam programs.
> The old motor drives are frequently found to be broken and underpowered.
> New motors and ~2/1 belt drive makes the machine better than new.
> The mechanics of the machine are very nice, otherwise. Good iron.
> Prices are highly variable. All depends on the seller, conditions, etc.
> RichD
>
> bsjoelund wrote:
> >
> > Hi folks,
> > I would like to know a bit more about the 2400. Has anyone made any
> > upgrades or modifications?
> >
> > I goal is to run TCNC and I would like to know what it would take to
> > do a conversion to work. I don´t know nothing about the 2400, only
> > that it is programmed with somekind of *basic*.
> >
> > Is this machine with steppers?
> >
> > Any hints about refitting a bigger (wider) X -table to get say 20" of
> > movement?
> >
> > What is acceptable price for a used 2400 in good condition, vise + 11
> > collets, DM-2010/20/30
> >
> > Any hints would be appreciated.
> >
> > Holiday Greetings to all of you
> > Bengt
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
> Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/
>
> To unsubscribe from this group, send an email to:
> CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
--
Kim Lux <lux@...>