Re: [CAD_CAM_EDM_DRO] COMPUTER MONITOR On Topic
Posted by
Randy Gordon-Gilmore
on 2003-12-18 11:21:04 UTC
At 02:04 PM 12/18/2003 EST, Bill wrote:
"iopener" (ex-Internet appliance) with a 10.4" LCD (800x600 native
resolution in graphics mode). The second is an "IPNI" (ex-hospital kiosk
PC) with a 12" LCD (1024x768 native resolution in graphics mode.) I use
both of them (not at the same time...) with CNC Pro with no problem
whatsoever. I am sure that each monitor manufacturer has made an
optimized font for their screen so that 80x25 text mode will display
cleanly.
Best regards,
Randy
--
Randy Gordon-Gilmore ,----.___________ ______________ _________________
ProtoTrains // = = === == || == == == = || == == == = == =|
Rio Vista, CA, USA /-O==O------------o==o------------o==o-----------o==o-'
zephyrus@... http://www.prototrains.com
>This was ON TOPIC, it was asking about using LCD (new) technology, with 450SHOP
>MHZ (old) processor , with DOS (ancient) operating system, and in a HOME
>application with one of the modern Hobby priced CNC, CAM program. TurboCNC.Bill, both my garage computers have LCD monitors. The first is an
"iopener" (ex-Internet appliance) with a 10.4" LCD (800x600 native
resolution in graphics mode). The second is an "IPNI" (ex-hospital kiosk
PC) with a 12" LCD (1024x768 native resolution in graphics mode.) I use
both of them (not at the same time...) with CNC Pro with no problem
whatsoever. I am sure that each monitor manufacturer has made an
optimized font for their screen so that 80x25 text mode will display
cleanly.
Best regards,
Randy
--
Randy Gordon-Gilmore ,----.___________ ______________ _________________
ProtoTrains // = = === == || == == == = || == == == = == =|
Rio Vista, CA, USA /-O==O------------o==o------------o==o-----------o==o-'
zephyrus@... http://www.prototrains.com
Discussion Thread
wanliker@a...
2003-12-18 11:04:45 UTC
COMPUTER MONITOR On Topic
Randy Gordon-Gilmore
2003-12-18 11:21:04 UTC
Re: [CAD_CAM_EDM_DRO] COMPUTER MONITOR On Topic