Re: [CAD_CAM_EDM_DRO] SEM servo motor

Hi, good chance they are "Locktited" and might need some gentle heat to
loosen the locktite. i am not familiar with those motors but most are
locktited to keep them from comming loose. cul brian f.

----- Original Message -----
From: "antson20022" <antson@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Thursday, January 01, 2004 10:00 AM
Subject: [CAD_CAM_EDM_DRO] SEM servo motor


> I have some brand new SEM servo motors that I got on e-bay. P/N is
> MT30H4-44. There is a tach in the back end where I want to put an
> encoder. The problem is getting the tack out. It appears that the
> outside permenant magnets are pressed or glued or something in place.
> I made a puller but the screws pulled out. THEN I have to get the
> armature off, which is going to be a real bugger. Has anyone had any
> experiance getting these out. I was told they would just "pop"
> out...........NOT! Any help would be greatly appricated.
>
> Thanks, Tony
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/
>
> To unsubscribe from this group, send an email to:
> CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
>
>
>