Still available.

It's much to my regret that I've got to sell this stuff. But I've
got other obligations that need to be addressed before I can
continue with my servo system. Don't worry I'll kick myself later.

But I've got to sell the Gecko System That I built.

3 X Gecko G320 Servo Drives.
1 Axxus Parallel Port Breakout board
1 Axxuss Dual Relay Board.
1 36vDC 10A power supply
1 Home made LM317 12v Regulator
1 Sescom Enclosure (Engraved legends)
Molex Connectors for Motor and encoder connections
12vDC Enclosure Fan
3 Electrocraft Servo Motors with 250CPR Encoders

Features 3axis control
Parallel Port Controlled Spindle and Auxillary 110vAC oulets
Individual Limit and Home Connections
Completely assembled and ready to wire up to your router/mill

(While I've not ran the setup on a router or mill at this time, I
have tested each axis, and all home/limit and relay functions.)

(The Geckos will need to be tuned once you are ready to go)

The cables for the encoders are short and will need to be replaced
with longer ones or be extended via splicing. I will include the
extra Molex connectors and pins to add to "your" motor Power and
Encoder Wires.

I will include a pinout and Wiring diagram for the connections

I've got almost $1000 invested in this + my time.

This will save someone a "LOT" of time and energy

Here are some links to photos.
Insides...
http://home.insightbb.com/~nnoel/CNC/drivebox.jpg

Front...
http://home.insightbb.com/~nnoel/CNC/drivebox2.jpg

Back...
http://home.insightbb.com/~nnoel/CNC/drivebox3.jpg

Here is one of the motors attached to my Z Axis (Not included). The
other 2 motors are identical except they have Black bodies. Same
part numbers though.
http://home.insightbb.com/~nnoel/CNC/z1.jpg

First $900 takes everything. +Shipping (FIRM)

US only please... Canada Maybe... You'd have to twist my arm though,
It'd be a fairly heavy package.

email me at nnoel@i...