Re: [CAD_CAM_EDM_DRO] Campbell boards and external relays

Thomas,

It comes with four small relays on an external PCB that attaches to the
breakout board. If you have a breakout board, please check to see if it has
a connector labeled relay.

I will get Jim Cullins to take a picture of one and I will add it to my web
page.

Thanks for your interest in out products.

Bob Campbell
http://www.campbelldesigns.com
Breakout Boards
VisualMill 5.0 basic
Stepper motors
Plasma Torch Height, THC 300 boards

----- Original Message -----
From: "Thomas Powell" <tppjr@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Monday, January 19, 2004 12:22 PM
Subject: [CAD_CAM_EDM_DRO] Campbell boards and external relays


> Bob,
>
> I could not find your relay boards on your site. Do you have to use a
> electronic relay or can regular relays be used?
>
> Thanks,
>
> Thomas
> ----- Original Message -----
> From: "Robert Campbell" <bob@...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Monday, January 19, 2004 7:13 AM
> Subject: Re: [CAD_CAM_EDM_DRO] Campbell boards and charge pump for Mach2
>
>
> > The charge pump function is jumper selectable. With the M1/N1 jumper on
> the breakout board in the M1 position, the charge pump would be selected.
> The out 4 terminal will be on.
> >
> > We have the external relay boards in stock for $40.00
> >
> > Bob Campbell
> > http://www.campbelldesigns.com
> > Breakout Boards
> > VisualMill 5.0 basic
> > Stepper motors
> > Plasma Torch Height, THC 300 boards
> > ----- Original Message -----
> > From: "whynot06110" <whynot06110@...>
> > To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> > Sent: Monday, January 19, 2004 4:18 AM
> > Subject: [CAD_CAM_EDM_DRO] Campbell boards and charge pump for Mach2
> >
> >
> > > Does Campbell boards integrate the charge pump ? Already wired ?
> > >
> > > If not, where can I find a wiring diagram showing how to do it ?
> > >
> > > Does Bob provides the PCB relay board ?
> > >
> > >
> > >
> > > Addresses:
> > > FAQ: http://www.ktmarketing.com/faq.html
> > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > >
> > > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> > > Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> > > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > >
> > > OFF Topic POSTS: General Machining
> > > If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if
> you have trouble.
> > > http://www.metalworking.com/news_servers.html
> > >
> > > http://groups.yahoo.com/group/jobshophomeshop I consider this to be
a
> sister site to the CCED group, as many of the same members are there, for
OT
> subjects, that are not allowed on the CCED list.
> > >
> > > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > > bill
> > > List Mom
> > > List Owner
> > >
> > >
> > >
> > > Yahoo! Groups Links
> > >
> > > To visit your group on the web, go to:
> > > http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/
> > >
> > > To unsubscribe from this group, send an email to:
> > > CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > >
> > > Your use of Yahoo! Groups is subject to:
> > > http://docs.yahoo.com/info/terms/
> > >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> > Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if
> you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
OT
> subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> >
> > Yahoo! Groups Links
> >
> > To visit your group on the web, go to:
> > http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/
> >
> > To unsubscribe from this group, send an email to:
> > CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> >
> > Your use of Yahoo! Groups is subject to:
> > http://docs.yahoo.com/info/terms/
> >
> >
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/
>
> To unsubscribe from this group, send an email to:
> CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
>