RE: [CAD_CAM_EDM_DRO] Brushless servo drives (inexpensive) ???

Try the Advanced Motion Controls website at www.a-m-c.com. They have several
units that will run at 20 to 60 VDC. You can find these on eBay sometimes.
Hope this helps.


Best,

Ed Gilbert

Gilbert Engineered Systems
632 Warrenton-Embro Road
Macon, NC 27551
252-257-0539

> -----Original Message-----
> From: mueller914 [mailto:mueller914@...]
> Sent: Tuesday, January 20, 2004 3:28 PM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: [CAD_CAM_EDM_DRO] Brushless servo drives (inexpensive) ???
>
> I have in my possesion some Pacific Scientific Brushless DC
> Servomotors.
>
> 4 pole, 3 phase, +4.5-24.00VDC, 1000 pulse per rev
> (R24HENA-HS-LB-NV-OO)
>
>
> The drivers from PacSci are ~850.00 (each !!!!)
>
> What are my alternitive choices to be able to use these motors?
>
> Thanks
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
>
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/
>
> To unsubscribe from this group, send an email to:
> CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
>
>
>
> -------------------------------------
> This message has been scanned for viruses and
> dangerous content by NCOL.NET, and is believed to be clean.