Re: [CAD_CAM_EDM_DRO] digital caliper

Ian,
I got this one from electronic goldmine ~$50.00. The digital readout goes up
to 999.99mm or 99.999in just to let you know. But the scale is only 6in or
150mm long.

Derek
Subject: Re: [CAD_CAM_EDM_DRO] digital caliper

>Thanks Derek,
>
>The pictures look good. I'll have to have a good look at them to decide

just

>how it works but, at first glance, it appears to be some form of
>straightforward electronic vernier.
>
>Ian
>
>--
>Ian W. Wright
>Sheffield UK
>
>
>----- Original Message -----
>From: derek barger <hightechsystems@...>
>To: <CAD_CAM_EDM_DRO@egroups.com>
>Sent: 09 April 2000 18:45
>Subject: Re: [CAD_CAM_EDM_DRO] digital caliper
>
>
>> Hi Ian,
>> I downloaded pictures of the caliper to our file site here is the address
>> http://www.onelist.com/files/CAD_CAM_EDM_DRO/caliper/
>> you will have to magnify the pictures to see the details.
>>
>
>
>
>------------------------------------------------------------------------
>LOW RATE, NO WAIT!
>Get a NextCard Visa, in 30 seconds! Get rates
>as low as 2.9% Intro or 9.9% Fixed APR and no hidden fees.
>Apply NOW!
>http://click.egroups.com/1/2122/2/_/423600/_/955323342/
>------------------------------------------------------------------------
>
>Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the

discussion of shop built systems in the above catagories.

>To Unsubscribe, read archives, change to or from digest.
>Go to: http://www.onelist.com/isregistered.cgi
>Log on, and you will go to Member Center, and you can make changes there.
>For the FAQ, go to http://www.ktmarketing.com/faq.html
>bill,
>List Manager
>