CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Wire EDM = Hot Wire????

Posted by Greg Nuspel
on 2004-02-16 02:40:50 UTC
Gilles software does not use standard U,V designations but it does run two
X,Y axis independent of each other. I think this is only because Gilles is
not a machinist and the naming convention are easier for the users to
understand. Gilles software is designed primarily for cutting model airplane
wing cores but it has the capability of cutting other shapes. There are
programs written for it that accept DXF you can take a look at what's
available here http://gm.cnc.free.fr/index_en.html

--Greg Nuspel

http://www.ckua.com Radio for the adventurous.

Study art and logic - learn to draw your own conclusions.
http://QLiner.com

Discussion Thread

Fernando 2004-02-15 13:31:19 UTC Wire EDM = Hot Wire???? Greg Nuspel 2004-02-15 16:58:28 UTC Re: [CAD_CAM_EDM_DRO] Wire EDM = Hot Wire???? ward hagaman 2004-02-15 21:23:56 UTC Re: Wire EDM = Hot Wire???? Greg Nuspel 2004-02-16 02:40:50 UTC Re: [CAD_CAM_EDM_DRO] Re: Wire EDM = Hot Wire????