Re: Where to find parts?

I haven't looked at the surplus sites for your specific items, but I
would bet that you are being way too particular and trying to find
the exacty specs outlined in your list.

This is not necessary.

You can use just about any rating for a bridge rectifier, as long as
the volts and amps are BIGGER than what you need. The price shouldn't
change very much for the higher-rated parts, either.

You can also parallel 2 (or more) capacitors of a smaller uF rating,
and just add the uF to get the 12000 y9u need. For instance, (3) 4000
uF caps in parallel will work exactly the same a s(1) 12000uF one.
And you can go to a higher voltage rating with no problem, although,
as some have already pointed out, if you go to something like a 250V
capacitor, the internal resistance wil be higher, and theoretically
it won't be as good.

But don't sweat the exact specs, and you should find the stuff w/ no
problem.

Andyst24540 wrote:

> >
> > > Hey everybody.
> > > Where is a good source for parts in the Jerrys power supply

file?

> > > I need 24V 10 amp transformers, 12 amp 100V bridge rectifier,
> > > and 12000 UF 100V Capacitor.
> > > I tried the links he had listed but they would not come up.
> > > Thanks
> > > John
> > >
> > >
> > >
> > > Addresses:
> > > FAQ: http://www.ktmarketing.com/faq.html
> > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > >
> > > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> wanliker@a...,
> > > timg@k...
> > > Moderator: pentam@c... indigo_red@q... davemucha@j...
> > > [Moderators]
> > > URL to this group:

http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

> > >
> > > OFF Topic POSTS: General Machining
> > > If you wish to post on unlimited OT subjects goto:
> > > aol://5863:126/rec.crafts.metalworking or go thru Google.com

to

> reach
> > > it if you have trouble.
> > > http://www.metalworking.com/news_servers.html
> > >
> > > http://groups.yahoo.com/group/jobshophomeshop I consider

this

> to be
> > > a sister site to the CCED group, as many of the same members

are

> > > there, for OT subjects, that are not allowed on the CCED list.
> > >
> > > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
> POSTING
> > > THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
> EXCEPTIONS........
> > > bill
> > > List Mom
> > > List Owner
> > >
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> > >
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,

wanliker@a..., timg@k...

> Moderator: pentam@c... indigo_red@q... davemucha@j...

[Moderators]

> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:

aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach
it if you have trouble.

> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this

to be a sister site to the CCED group, as many of the same members
are there, for OT subjects, that are not allowed on the CCED list.

>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY

POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
EXCEPTIONS........

> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]