CAD CAM EDM DRO - Yahoo Group Archive

Re: laptop port - power

Posted by caudlet
on 2004-02-29 09:10:53 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "turbulatordude"
<davemucha@j...> wrote:
> On the pcb driller, that's fine as 110 is available. for telescope
> work it is a car battery for power and the laptop.
>
> It looks like the Sound Logic boards are 110.
>
> Dave
>
>
>
You might see if you can input 12VDC into the supply side of the
board. I know that the SL card has separate windings and power
sources for the PC ground reference side (+5 for S & D) and the +12
for machine logic. Perhaps Jim at SL could come up with a way to use
the card with a 12VDC source.....He monitors the list so should pick
this thread up.

Tom C

Discussion Thread

amkibel 2004-02-27 02:59:05 UTC laptop port jerrybiehler 2004-02-27 03:31:35 UTC Re: laptop port Greg Nuspel 2004-02-27 03:46:39 UTC Re: [CAD_CAM_EDM_DRO] Re: laptop port Kevin R. Walsh 2004-02-27 17:09:43 UTC Re: laptop port turbulatordude 2004-02-27 18:54:44 UTC Re: laptop port Robert Campbell 2004-02-27 19:16:30 UTC Re: [CAD_CAM_EDM_DRO] Re: laptop port turbulatordude 2004-02-28 06:37:16 UTC Re: laptop port - power Robert Campbell 2004-02-28 09:06:50 UTC Re: [CAD_CAM_EDM_DRO] Re: laptop port - power turbulatordude 2004-02-29 08:48:01 UTC Re: laptop port - power caudlet 2004-02-29 09:10:53 UTC Re: laptop port - power Robert Campbell 2004-02-29 09:48:55 UTC Re: [CAD_CAM_EDM_DRO] Re: laptop port - power Greg Nuspel 2004-02-29 10:03:40 UTC Re: [CAD_CAM_EDM_DRO] Re: laptop port - power james_cullins@s... 2004-02-29 11:01:26 UTC Re: [CAD_CAM_EDM_DRO] Re: laptop port - power