RE: [CAD_CAM_EDM_DRO] Porter Cable 1 3/4 hp router as spindle?
Posted by
Leslie M. Watts
on 2004-03-08 16:17:34 UTC
Hi Roger
I have both units... the 1 3/4 and the 3 1/4 PC routers.
I think the smaller one is fine for light work with small
bits.
Note that the real horsepower is a good bit less than
advertised on these.
The price difference is not that great if you just buy the
3 1/4 motor without the base. It is about $250 or so. The
only complaint I have is about the noise...hearing protection
is certainly in order.
Les
Leslie M.Watts
L M Watts Furniture
Tiger Georgia USA
(706) 212-0242
http://www.lmwatts.com
Engineering page:
http://www.lmwatts.com/shop.html
CNC surplus for sale:
http://www.lmwatts.com/forsale.html
CNC carved signs:
http://www.lmwatts.com/signwp.html
-----Original Message-----
From: vrsculptor [mailto:vrsculptor@...]
Sent: Monday, March 08, 2004 6:55 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Porter Cable 1 3/4 hp router as spindle?
Does anyone have any experience using one of the 1 3/4 hp Porter
Cable routers as a spindle? I would be using it on the mill for a
high speed spindle with small cutters. The 3 1/2 hp is a lot more
money.
Roger
I have both units... the 1 3/4 and the 3 1/4 PC routers.
I think the smaller one is fine for light work with small
bits.
Note that the real horsepower is a good bit less than
advertised on these.
The price difference is not that great if you just buy the
3 1/4 motor without the base. It is about $250 or so. The
only complaint I have is about the noise...hearing protection
is certainly in order.
Les
Leslie M.Watts
L M Watts Furniture
Tiger Georgia USA
(706) 212-0242
http://www.lmwatts.com
Engineering page:
http://www.lmwatts.com/shop.html
CNC surplus for sale:
http://www.lmwatts.com/forsale.html
CNC carved signs:
http://www.lmwatts.com/signwp.html
-----Original Message-----
From: vrsculptor [mailto:vrsculptor@...]
Sent: Monday, March 08, 2004 6:55 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Porter Cable 1 3/4 hp router as spindle?
Does anyone have any experience using one of the 1 3/4 hp Porter
Cable routers as a spindle? I would be using it on the mill for a
high speed spindle with small cutters. The 3 1/2 hp is a lot more
money.
Roger
Discussion Thread
vrsculptor
2004-03-08 15:55:35 UTC
Porter Cable 1 3/4 hp router as spindle?
Leslie M. Watts
2004-03-08 16:17:34 UTC
RE: [CAD_CAM_EDM_DRO] Porter Cable 1 3/4 hp router as spindle?
Robert Campbell
2004-03-08 16:24:13 UTC
Re: [CAD_CAM_EDM_DRO] Porter Cable 1 3/4 hp router as spindle?
rrc62_03782
2004-03-08 17:38:36 UTC
Re: Porter Cable 1 3/4 hp router as spindle?