CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Yet more DRO

Posted by Eric Keller
on 2000-04-13 13:36:03 UTC
It seems to me that most of the glass scales are 20 micron with quadrature
down to 5 micron and the cheap ones are 40/10 micron.
5 micron takes 1270 lines per inch. After that they start playing with
analog voltages(, and generally fooling themselves?)
eric

----- Original Message -----
From: Tim Barnard <tbarnard@...>
To: <CAD_CAM_EDM_DRO@egroups.com>
Sent: Thursday, April 13, 2000 3:57 PM
Subject: RE: [CAD_CAM_EDM_DRO] Yet more DRO


Just remember you can't make a jig bore out of a knee mill with a dro. 1
micron is really pushing the envelope.

Tim Barnard

Discussion Thread

Eric Keller 2000-04-13 13:36:03 UTC Re: [CAD_CAM_EDM_DRO] Yet more DRO