Re: [CAD_CAM_EDM_DRO] etching on wood
Posted by
Fung Chen
on 2000-04-17 06:03:53 UTC
I am also toying with the idea of first etching on a
metal plate (relief or emboss) then heating the wood
with the etched plate, hoping the protruding area will
then be burnt darker. Any opinion or suggestions, eg.
on how I can translate a scanned image into an etched
metal plate
--- Bertho Boman <boman@...> wrote:
Do You Yahoo!?
Send online invitations with Yahoo! Invites.
http://invites.yahoo.com
metal plate (relief or emboss) then heating the wood
with the etched plate, hoping the protruding area will
then be burnt darker. Any opinion or suggestions, eg.
on how I can translate a scanned image into an etched
metal plate
--- Bertho Boman <boman@...> wrote:
> Often it is done with scanning mirrors and beam__________________________________________________
> control.
>
> I have not seen it but I have heard of another
> method that uses a metal mask.
> Bertho
> ===================================
>
> Fung Chen wrote:
>
> > I am trying to build a laser system to etch
> drawings
> > on wood or corksheet. Anyone knows of any hardware
> or
> > software that can enable one to do so. I am
> thinking
> > of variable speed - slower=darker,
> faster=lighter.Peter
>
>
Do You Yahoo!?
Send online invitations with Yahoo! Invites.
http://invites.yahoo.com
Discussion Thread
Fung Chen
2000-04-17 06:03:53 UTC
Re: [CAD_CAM_EDM_DRO] etching on wood
zeff1015@a...
2000-04-17 06:20:58 UTC
Re: [CAD_CAM_EDM_DRO] etching on wood
Alan Moore
2000-04-17 15:59:12 UTC
Re: [CAD_CAM_EDM_DRO] etching on wood
Harrison, Doug
2000-04-25 05:26:47 UTC
RE: [CAD_CAM_EDM_DRO] etching on wood