Textron/Bridgeport scale
Posted by
Bob
on 2004-04-09 10:14:12 UTC
Hi All- I have a problem that I need HELP on. I have a Textron DRO
scale that I would like to use on my home built DRO. I need to know
the pinout of the plug. It is a 6 pin cannon plug and doesn't seem to
hold to the red=5v and black=ground convention. Two of the pins have
two wires in them and I believe these are the 5v and ground pins, but
before I turn the scale into a smoking ruin, I need the information.
There is no info that I can find on the Textron DRO.
Thanks in advance!!
Bob
scale that I would like to use on my home built DRO. I need to know
the pinout of the plug. It is a 6 pin cannon plug and doesn't seem to
hold to the red=5v and black=ground convention. Two of the pins have
two wires in them and I believe these are the 5v and ground pins, but
before I turn the scale into a smoking ruin, I need the information.
There is no info that I can find on the Textron DRO.
Thanks in advance!!
Bob