Re: [CAD_CAM_EDM_DRO] NEMA 23 changing rotation direction on one motor
Posted by
JanRwl@A...
on 2004-05-12 20:15:06 UTC
In a message dated 5/12/2004 8:52:01 PM Central Standard Time, KM6VV@...
writes:
You can change the direction pin state, if you are running step/dir.
For 4 phase, you can reverse the order of the step codes.
why not simply swap the two wires of one motor-phase, if you don't want to
change the software to do the same thing?
[Non-text portions of this message have been removed]
writes:
You can change the direction pin state, if you are running step/dir.
For 4 phase, you can reverse the order of the step codes.
why not simply swap the two wires of one motor-phase, if you don't want to
change the software to do the same thing?
[Non-text portions of this message have been removed]
Discussion Thread
testfly@a...
2004-05-12 18:31:53 UTC
NEMA 23 changing rotation direction on one motor
Alan Marconett
2004-05-12 18:50:22 UTC
Re: [CAD_CAM_EDM_DRO] NEMA 23 changing rotation direction on one motor
testfly@a...
2004-05-12 19:14:59 UTC
Re: [CAD_CAM_EDM_DRO] NEMA 23 changing rotation direction on one motor
JanRwl@A...
2004-05-12 20:15:06 UTC
Re: [CAD_CAM_EDM_DRO] NEMA 23 changing rotation direction on one motor
Nick Ibbitson
2004-05-13 09:24:28 UTC
Re: [CAD_CAM_EDM_DRO] NEMA 23 changing rotation direction on one motor
Nick Ibbitson
2004-05-13 09:27:23 UTC
Re: [CAD_CAM_EDM_DRO] NEMA 23 changing rotation direction on one motor
notoneleft
2004-05-13 09:43:44 UTC
Re: NEMA 23 changing rotation direction on one motor
testfly@a...
2004-05-13 10:01:51 UTC
Re: [CAD_CAM_EDM_DRO] NEMA 23 changing rotation direction on one motor
Alan Marconett
2004-05-13 10:24:36 UTC
Re: [CAD_CAM_EDM_DRO] NEMA 23 changing rotation direction on one motor
Nick Ibbitson
2004-05-14 08:22:55 UTC
Re: [CAD_CAM_EDM_DRO] NEMA 23 changing rotation direction on one motor