CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Digest Number 465

Posted by Tim Goldstein
on 2000-04-24 06:13:28 UTC
> Programers:

Don't know if this label applies, but here are some answers.

> #1 Where do I go to download EMC?

http://www.isd.cme.nist.gov/projects/emc/emc.html

> #2 Is it possible to compile the EMC program for a Mac and use Mac Linux?

Don't know if anyone has tried. It is programmed in C so it may be worth
giving it a try.

> #3 Does anyone know of any company who makes a Mac control for
> steppers/servos?

Nothing commercial that I know of but you may want to look at the following:
http://www.bmumford.com/cncmill/index.html
http://www.bmumford.com/ebay/details/details.html
There was also a link posted lately that to a site in the UK for MAC CNC

> #4 How much Hard drive space and memory does EMC require?

The smallest I have installed on is a 850 mb drive with 24 mb RAM.

> #5 Would a Pentium 133 MHz be ok with EMC?

It would run the older stepper motion module just fine, but for the newest
stuff you will want a 350 or better.


Tim
[Denver, CO]

timg@... <mailto:timg@...>
http://www.ktmarketing.com



> Thank You
> Rich Gillen
>

Discussion Thread

Armilite@a... 2000-04-24 01:10:49 UTC Re: [CAD_CAM_EDM_DRO] Digest Number 465 Dan Falck 2000-04-24 05:40:57 UTC Re:Digest Number 465- EMC questions Tim Goldstein 2000-04-24 06:13:28 UTC RE: [CAD_CAM_EDM_DRO] Digest Number 465 james owens 2000-04-24 07:02:53 UTC Re: [CAD_CAM_EDM_DRO] Digest Number 465