Re: [CAD_CAM_EDM_DRO] bridgeport - geckodrives and mach 2
Posted by
Les Newell
on 2004-05-21 15:02:40 UTC
Hi Aaron,
I have converted my Series 1 BP to Geckos and Mach2. The machine
performs far better than with the original BOSS5 control. Rapids are
about twice as fast and movement is much smoother.
Geckos are slightly undersized for the Bridgeport steppers but they work
quite well if the motors are wired using only two coils and the Geckos
are run at full current and about 75V.
Les
Aaron wrote:
I have converted my Series 1 BP to Geckos and Mach2. The machine
performs far better than with the original BOSS5 control. Rapids are
about twice as fast and movement is much smoother.
Geckos are slightly undersized for the Bridgeport steppers but they work
quite well if the motors are wired using only two coils and the Geckos
are run at full current and about 75V.
Les
Aaron wrote:
> Has anyone converted a bridgeport mill using mach2 controlling geck drive
>
> .....any comment oon this combo would be grately recieved
>
>
>
> thanx
>
> Aaron
Discussion Thread
Aaron
2004-05-21 14:35:57 UTC
bridgeport - geckodrives and mach 2
Les Newell
2004-05-21 15:02:40 UTC
Re: [CAD_CAM_EDM_DRO] bridgeport - geckodrives and mach 2
ted_griebling
2004-05-23 17:51:17 UTC
Re: bridgeport - geckodrives and mach 2
vavaroutsos
2004-05-23 20:40:08 UTC
Re: bridgeport - geckodrives and mach 2
ted_griebling
2004-05-24 08:18:55 UTC
Re: bridgeport - geckodrives and mach 2
Raymond Heckert
2004-05-25 17:03:53 UTC
Re: [CAD_CAM_EDM_DRO] Re: bridgeport - geckodrives and mach 2