CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Sherline work and tool cooling

Posted by AbbyKatt
on 2004-07-18 08:08:24 UTC
Vee,

This looks really cool! How fast is the air that flows out of this at
the end? Is it fast enough to also blow the chips out of the way? I get
the terrible fear when my swarf builds up - and this forces me to come
in with the paintbrush and keep sweeping it up for long operations (not
exactly completely automated CNC..)

They nicely give their plans on the site too, so I'll probably just
experiment at building my own.
Now I finally have an excuse to get that compressor I always wanted. :)

Regards,
Abby




-----Original Message-----
From: Ron [mailto:veeguy@...]
Sent: 18 July 2004 15:27
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Sherline work and tool cooling


Have you considered vortex cooling? All you need is about 2 cfm of
compressed air, no coolants to buy, no mess, chip removal. You can
get a setup for less than $200.00 (or build your own).

Its perfect for a home shop. The only downside is that is doesn't
add any lubrication to the tool, just cooling.

The link below will take you to one source of air powered vortex
coolers. I have bought their vortex enclosure coolers, and they work
great for years on end, no moving parts, no hassles!


<http://www.iscsales.com/products/vortec/spotcooling.html#coldguns>

veeguy




Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there,
for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........ bill
List Mom List Owner


Yahoo! Groups Links

Discussion Thread

Ron 2004-07-18 07:26:56 UTC Sherline work and tool cooling AbbyKatt 2004-07-18 08:08:24 UTC RE: [CAD_CAM_EDM_DRO] Sherline work and tool cooling Roy J. Tellason 2004-07-18 15:25:25 UTC Re: [CAD_CAM_EDM_DRO] Sherline work and tool cooling