Re: [CAD_CAM_EDM_DRO] analog +/- 10V into step/direction?

Hi Irfran
If you just want to drive a stepper motor CW or CCW with the speed
proportional to the voltage, that should be fairly easy with voltage to
frequency converter, something to detect the zero crossing and a little
logic. May have to add some control of ramping the speed up and down.
Bob

----- Original Message -----
From: "irfan_younis" <irfan_younis@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, July 27, 2004 1:06 PM
Subject: [CAD_CAM_EDM_DRO] analog +/- 10V into step/direction?


> Dear Friends,
> I would like to convert analog +/- 10V into step/direction, any one
> have experience in this type of conversion?
>
> Best regards,
>
> Irfan
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>