Re: [CAD_CAM_EDM_DRO] BOSS5 question

My Maint manual (page 9-2) shows T7, part#1504349 is located on the
inside of the Axis Drive Chassis (I think that's in the upper portion of
the control cabinet), look for 3 big matched (5500 mfd @ 200vdc)
capacitor filters. The manual calls out T6 as part# 1508469, but I don't
see where it is located. However, in the schematics, it shows up as the
56v power transformer. Wire #'s 34 & 35 come from it, going to the power
bridge rectifier ass'y. That bridge feeds FU10 via wire# 75. The common
side of that bridge is serviced by wire # 29. HTH
RayHex

odowdpat wrote:

>
> does anyone know where in the control cabinate,on a boss5
> controler, the T6 and T7 tranformers are located? Are they behind
> the upper bank of capacitors and are the bridge rectifiers in the
> same place?
> Thanks for your help.
> Pat