Re: [CAD_CAM_EDM_DRO] strange servo movement
Posted by
james_cullins@s...
on 2004-08-11 05:55:22 UTC
Aaron,
Does the Dir LED change when the dir changes?
Monitor the voltage on the Dir terminal to see if the signal is a good 5v
and gnd as you toggle the dir with the arrow keys .
Check the encoder wiring and connections very carefully. Make sure they
are not running close to the motor or power wires.
Let me know. I will be out of town the rest of today but will check my email
this evening.
Jim Cullins
Sound Logic
Does the Dir LED change when the dir changes?
Monitor the voltage on the Dir terminal to see if the signal is a good 5v
and gnd as you toggle the dir with the arrow keys .
Check the encoder wiring and connections very carefully. Make sure they
are not running close to the motor or power wires.
Let me know. I will be out of town the rest of today but will check my email
this evening.
Jim Cullins
Sound Logic
----- Original Message -----
From: "azzi_b" <azzi_b@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, August 11, 2004 3:42 AM
Subject: [CAD_CAM_EDM_DRO] strange servo movement
> I have now installed the rutex drives and campbell board into my b/p
> series 1 cnc. I am however having a perculiar thing happen on the x
> axis. The axis will travel fine for a short period, then stop and go
> the other way.
>
> Anyone any ideas !!!
>
> thanx
>
> Aaron
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
Discussion Thread
azzi_b
2004-08-11 01:42:52 UTC
strange servo movement
james_cullins@s...
2004-08-11 05:55:22 UTC
Re: [CAD_CAM_EDM_DRO] strange servo movement
Larry Ragan
2004-08-11 09:35:12 UTC
RE: [CAD_CAM_EDM_DRO] strange servo movement
user_cnc
2004-08-11 15:30:39 UTC
Re: strange servo movement