CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Power Supply Caps and Xformer

Posted by Jon Elson
on 2004-09-01 12:17:03 UTC
>From: Abby Katt [mailto:cnc@...]
>
>Hello again my ever resourceful allies, :)
>
>So, I'm going to build a big power-supply, but I have 2 questions.
>First, the specs of the powersupply:
>
>Needs to be 50V @ 20A = 1000W
>
>Am I correct in assuming that I need a 2000VA transformer for this,
>as 2000VA would = 1000W (because of the whole sine wave thing), or
>would 1000VA = 1000W?
>
>
I think you are going way overboard on this! Do you really need to deliver
1000W continuously to the load? Do you know how much power that
REALLY IS? Unless you have a huge router with a heavy gantry, and
expect to be inlaying doors in a production shop, you do NOT need such a
huge power supply. I don't quite know what you are building, but 250 W
may be sufficient, 500 W is almost certainly enough. These unregulated
power supplies are capable of delivering momentary overloads safely.
That's what the capacitors are for, in fact! I ran a mini-mill at the last
NAMES show using my owm servo drives with a power supply that is
closer to 150 W, and it ran cool all day.

Jon

Discussion Thread

Abby Katt 2004-09-01 02:08:06 UTC Power Supply Caps and Xformer Leslie Watts 2004-09-01 06:09:48 UTC RE: [CAD_CAM_EDM_DRO] Power Supply Caps and Xformer Abby Katt 2004-09-01 06:20:48 UTC Re: Power Supply Caps and Xformer Leslie Watts 2004-09-01 06:53:30 UTC RE: [CAD_CAM_EDM_DRO] Re: Power Supply Caps and Xformer Jon Elson 2004-09-01 07:41:24 UTC Re: [CAD_CAM_EDM_DRO] Re: Power Supply Caps and Xformer JanRwl@A... 2004-09-01 08:47:24 UTC Re: [CAD_CAM_EDM_DRO] Power Supply Caps and Xformer Jon Elson 2004-09-01 12:17:03 UTC Re: [CAD_CAM_EDM_DRO] Power Supply Caps and Xformer kmslinda 2004-09-01 15:33:47 UTC Re: Power Supply Caps and Xformer Andy Wander 2004-09-01 16:10:18 UTC RE: [CAD_CAM_EDM_DRO] Re: Power Supply Caps and Xformer Fred Smith 2004-09-01 16:27:25 UTC Re: Power Supply Caps and Xformer sargossa_99 2004-09-01 17:05:36 UTC Re: Power Supply Caps and Xformer Greg Jackson 2004-09-01 19:09:35 UTC RE: [CAD_CAM_EDM_DRO] Re: Power Supply Caps and Xformer Jon Elson 2004-09-01 20:57:11 UTC Re: [CAD_CAM_EDM_DRO] Re: Power Supply Caps and Xformer Tim Leech 2004-09-02 00:45:38 UTC Re: Power Supply Caps and Xformer Abby Katt 2004-09-02 02:33:47 UTC Re: Power Supply Caps and Xformer Rod McBeath 2004-09-02 06:43:39 UTC RE: Re: Power Supply Caps and Xformer Jon Elson 2004-09-02 10:40:38 UTC Re: [CAD_CAM_EDM_DRO] Re: Power Supply Caps and Xformer Jon Elson 2004-09-02 10:46:12 UTC Re: [CAD_CAM_EDM_DRO] Re: Power Supply Caps and Xformer