Re: [CAD_CAM_EDM_DRO] FYI: PCBs

I use www.pcbfabexpress.com for proto types.
Jim

----- Original Message -----
From: "vavaroutsos" <pete@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, September 15, 2004 12:18 PM
Subject: [CAD_CAM_EDM_DRO] FYI: PCBs


> I have seen several posts about people wanting to get PCBs made. I
> thought this site may be of interest.
>
> www.expresspcb.com
>
> They have free schematic capture and layout software for use with
> their service. I have not used them personally (I have been using
> www.pcbexpress.com and have my own software), but it looked pretty
> good. If you don't want solder mask, and can live with a 3.8"x2.5"
> size board, there is the MiniBoard option at $51 for 3 boards.
>
> ~petev
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>