Re: [CAD_CAM_EDM_DRO] MPGs

if you don't understand electricity, and I think MPG is miles
per gallon, we have a large gap to bridge.

Does anyone in the aftermarket offer a good quality MPG that will work
with most any CNC equipment? A lot of the MPGs I see offered with
control upgrades seem to be in the $300-600 range. I'm not terribly
clear on what is inside one of them, but that seems like a lot for
what appears to be a pretty simple device. Every now and then there
will be a used Fanuc MPG on eBay. Are MPGs sufficiently generic that
they can be swapped between controls, or do they need to be designed
specifically for each control? Once electricity gets beyond the
plumbing level (that's "if I pour electrons in this end of the pipe,
they should come out at the far end") I make no claims of expertise on
the subject. thanks, Michael


Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
wanliker@...,
timg@... Moderator: pentam@...
indigo_red@... davemucha@... [Moderators] URL to
this
group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach
it if you have trouble. http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be
a sister site to the CCED group, as many of the same members are
there, for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC
DOMAIN BY POSTING
THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO
EXCEPTIONS........
bill List Mom List Owner


Yahoo! Groups Links