CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Ball screws and bearings

on 2004-10-07 17:26:31 UTC
Thanks for the leads on bearings. I ended up
finding a place around the corner from work. I'll
be tackling the ballnuts tonight, I didn't find
any good info on how to get everything back
together though.

Greg Kamysz



metlmunchr wrote:
>
> This site has 7201's in both standard and class 7 grades.
> http://www.bearingsdirect.com/product.htm
> Standards are about 12 bucks each, and the class 7's are $134 per pair.
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, Gregory Kamysz <smsupply@a...>
> wrote:
>
>>Anyone have a link for cleaning and reassembling
>>ball nuts? I took one apart thinking it was
>>dirty, turns out it was the bearings.
>>
>>I need to find some 7201K angular contact
>>bearings. 12x32x10mm Is this that uncommon of a
>>size? I haven't seen any online. I'll check with
>>the local supplier during the week.
>>
>>Also does anyone have a link for crossed roller
>>rail sets cheap? I need a 6350 size.
>>
>>Greg Kamysz

Discussion Thread

Michael Gamber 2004-10-03 14:37:00 UTC Super-Tech guts + Supercam software for sale Jon Elson 2004-10-03 17:25:42 UTC Re: [CAD_CAM_EDM_DRO] Super-Tech guts + Supercam software for sale Michael Gamber 2004-10-03 17:35:31 UTC Re: Super-Tech guts + Supercam software for sale Gregory Kamysz 2004-10-03 19:16:41 UTC Ball screws and bearings afogassa 2004-10-03 19:30:54 UTC Re: Ball screws and bearings aerowright 2004-10-04 07:45:04 UTC Re: Ball screws and bearings Drew Rogge 2004-10-04 10:18:01 UTC Re: [CAD_CAM_EDM_DRO] Re: Ball screws and bearings metlmunchr 2004-10-05 12:20:42 UTC Re: Ball screws and bearings Gregory Kamysz 2004-10-07 17:26:31 UTC Re: [CAD_CAM_EDM_DRO] Re: Ball screws and bearings R Rogers 2004-10-07 19:18:24 UTC Re: [CAD_CAM_EDM_DRO] Re: Ball screws and bearings Gregory Kamysz 2004-10-07 21:12:36 UTC Re: [CAD_CAM_EDM_DRO] Re: Ball screws and bearings