Re: [CAD_CAM_EDM_DRO] electrical interference

Go to the CNC pics group at yahoo and there are pics of my machine under rogermach and I did exactly what you are wanting to do. I didnt use any barriers in the control and its all in the same enclosure and it works fine. You cant run motor leads and encoder cables in the same conduit, they will crosstalk. They must be seperated.

Ron

sargossa_99 <rmcbeath@...> wrote:


I'm in the process of rebuilding a mill. I've got gecko 320's with
one of Bob's breakout boards. Nice, clean and easy. Now, to make it
even cleaner, I'd like to put the powersupply in the same box as the
new controller, but underneath (so, 60 thou of Al between them). Will
this create too much electrical interference, or should it be OK
below? Do I need to totally seperate the power supply and controller?

Also, is it OK to send the servo power and the encoder signals all
through the same conduit?

Now I'm on a roll... how about the computer in the same box as well?
seperated (not sealed) by a thin piece of tin?

I've got a nice big box the original controller came in, and would
like to re-use it and clean up the install by getting rid of the other
ugly boxes...

Thanks

Rod





Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links









---------------------------------
Do you Yahoo!?
Check out the new Yahoo! Front Page. www.yahoo.com

[Non-text portions of this message have been removed]