CAD CAM EDM DRO - Yahoo Group Archive

Re: stepper3 driver and mach2

Posted by ervtech
on 2004-11-07 16:35:46 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Dave Rigotti" <drigotti@a...> wrote:
> Rob,
> You don't specify what type of steppers you have. Are they 5,6, or 8
> wire types? If so you may want to look at www.hobbycnc.com 4AUPC 3 axis
> driver board kit at $79USD.
>
> Regards,
> Dave Rigotti
> HobbyCNC.com
>
Hi Dave,
I have a box of steppers to choose from, all are 6 wire ans range from 3 to 8 volts,1.8
degree/step and 1.8 A/phase.
Thanks for the reply
rob

Discussion Thread

ervtech 2004-11-07 07:15:31 UTC stepper3 driver and mach2 Geert De Pecker 2004-11-07 10:16:30 UTC Re: [CAD_CAM_EDM_DRO] stepper3 driver and mach2 Dave Rigotti 2004-11-07 10:25:31 UTC Re: [CAD_CAM_EDM_DRO] stepper3 driver and mach2 Robert Campbell 2004-11-07 11:33:00 UTC Re: [CAD_CAM_EDM_DRO] stepper3 driver and mach2 ervtech 2004-11-07 16:35:46 UTC Re: stepper3 driver and mach2 caudlet 2004-11-07 21:01:08 UTC Re: stepper3 driver and mach2 ervtech 2004-11-08 16:12:53 UTC Re: stepper3 driver and mach2