Re: [CAD_CAM_EDM_DRO] Gantry topology
Posted by
Les Newell
on 2004-11-08 12:59:58 UTC
If I remember correctly I paid about 35UKP for a 3.5 metre 8mm pitch x
30mm wide belt. The pulleys were about 15UKP each.
A 3.5 metre belt gives about 1.6 metres (roughly 5 feet) travel.
Belting is available on a roll rather than endless. I don't know about
the price though.
Les
John Heritage wrote:
30mm wide belt. The pulleys were about 15UKP each.
A 3.5 metre belt gives about 1.6 metres (roughly 5 feet) travel.
Belting is available on a roll rather than endless. I don't know about
the price though.
Les
John Heritage wrote:
>
> ----- Original Message -----
> From: John Heritage
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Sent: Monday, November 08, 2004 10:40 AM
> Subject: Gantry / Servo torque to linear force
>
>
> Thanks for the replies,
>
> I read that a 30ft length of rack and pinion would cost around $500. How do HTD belts compare in terms of price and performance?
>
> Best wishes,
> John
>
> [Non-text portions of this message have been removed]
>
>
Discussion Thread
John Heritage
2004-11-08 02:53:06 UTC
Gantry topology
turbulatordude
2004-11-08 06:19:42 UTC
Re: Gantry topology
John Heritage
2004-11-08 06:38:56 UTC
Re: [CAD_CAM_EDM_DRO] Re: Gantry topology
Les Newell
2004-11-08 12:59:58 UTC
Re: [CAD_CAM_EDM_DRO] Gantry topology