Re: Low cost 6A stepper drivers on eBay
Posted by
arielnh56
on 2004-12-02 21:08:30 UTC
I looked, but I couldn't see anything that answers my question.
Please clarify.
thanks
Al
Please clarify.
thanks
Al
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Brian" <ka1bbg@w...> wrote:
> got to www.cnconabudget.com and have a look. cul brian f.
> ----- Original Message -----
> From: "arielnh56" <3in1@r...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Wednesday, December 01, 2004 1:06 PM
> Subject: [CAD_CAM_EDM_DRO] Low cost 6A stepper drivers on eBay
>
>
> >
> >
> > There are two vendors selling basic 6A stepper drivers on eBay.
> >
> > One has a website http://www.electronicutopia.com and is selling
> > them for under $25. Seems to be a basic full step driver with no
> > isolation or heatsink.
> >
> > The other is user "esreng". His boards are about $47 but do half
step
> > and have a heatsink.
> >
> > I am looking for drivers to drive ~200oz/in steppers for my
Shoptask
> > 3-in-1. The Shoptask has a 2:1 ratio on the stepper drive and a
10
> > tpi lead screw so one full step would be 0.00025", which is more
than
> > the accuracy of my Acme lead screws, I think, so I don't think I
need
> > half step or microstep drivers.
> >
> > If anyone has any experience with these drivers or vendors or any
> > other advice on these it would be most welcome. I am on a small
> > budget so these are very tempting.
> >
> > thanks
> >
> > Alastair
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
wanliker@a...,
> timg@k...
> > Moderator: pentam@c... indigo_red@q... davemucha@j...
> [Moderators]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to
reach it if
> you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this
to be a
> sister site to the CCED group, as many of the same members are
there, for OT
> subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> > bill
> > List Mom
> > List Owner
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
Discussion Thread
arielnh56
2004-12-01 10:11:12 UTC
Low cost 6A stepper drivers on eBay
Statman Designs, LLC
2004-12-01 10:24:17 UTC
Re: [CAD_CAM_EDM_DRO] Low cost 6A stepper drivers on eBay
Brian
2004-12-01 14:05:19 UTC
Re: [CAD_CAM_EDM_DRO] Low cost 6A stepper drivers on eBay
arielnh56
2004-12-02 21:08:22 UTC
Re: Low cost 6A stepper drivers on eBay
arielnh56
2004-12-02 21:08:30 UTC
Re: Low cost 6A stepper drivers on eBay
knives01us
2004-12-03 02:47:10 UTC
Re: Low cost 6A stepper drivers on eBay
Statman Designs, LLC
2004-12-03 05:18:38 UTC
Re: [CAD_CAM_EDM_DRO] Re: Low cost 6A stepper drivers on eBay
Ron Ginger
2004-12-03 06:01:21 UTC
Re:Low cost 6A stepper drivers on eBay
turbulatordude
2004-12-03 09:16:06 UTC
Re:Low cost 6A stepper drivers on eBay
arielnh56
2004-12-03 10:16:35 UTC
Re: Low cost 6A stepper drivers on eBay
Fred Smith
2004-12-03 10:20:41 UTC
Re: Low cost 6A stepper drivers on eBay
v_fong
2004-12-04 09:23:52 UTC
Re: Low cost 6A stepper drivers on eBay
alex
2004-12-04 09:28:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: Low cost 6A stepper drivers on eBay
V FONG
2004-12-04 10:01:38 UTC
Re: [CAD_CAM_EDM_DRO] Re: Low cost 6A stepper drivers on eBay
turbulatordude
2004-12-04 10:09:11 UTC
Re: Low cost - EAS microstepper driver
V FONG
2004-12-04 10:44:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: Low cost - EAS microstepper driver