Re: [CAD_CAM_EDM_DRO] stepper motor wiring
Posted by
Alan Marconett
on 2004-12-30 12:48:37 UTC
Hi Ron,
5 wire or 6 wire? You can run 6 wire steppers bipolar.
The Superior Electric steppers usually use RED BLACK GREEN AND WHITE as
the "end" wires, and striped wire(s) as the center wires.
You can easily verify this with an ohm meter or DVM.
Alan KM6VV
ronkliewer wrote:
5 wire or 6 wire? You can run 6 wire steppers bipolar.
The Superior Electric steppers usually use RED BLACK GREEN AND WHITE as
the "end" wires, and striped wire(s) as the center wires.
You can easily verify this with an ohm meter or DVM.
Alan KM6VV
ronkliewer wrote:
>
>
> i just got a superior electric stepper m092-fd-429u 300 oz/in. with no
> schematic on hooking it up, it is unipolar.
> can anyone help?
> ron
>
>
>
>
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
> Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
Discussion Thread
ronkliewer
2004-12-29 18:53:00 UTC
stepper motor wiring
Bob Weiss
2004-12-30 08:07:47 UTC
Re: stepper motor wiring
Alan Marconett
2004-12-30 12:48:37 UTC
Re: [CAD_CAM_EDM_DRO] stepper motor wiring
JanRwl@A...
2004-12-30 22:06:59 UTC
Re: [CAD_CAM_EDM_DRO] stepper motor wiring
Tom Hubin
2004-12-30 23:15:36 UTC
Re: [CAD_CAM_EDM_DRO] stepper motor wiring