CAD CAM EDM DRO - Yahoo Group Archive

Re: motor running voltage for Electrocraft E670 -06

Posted by cnc_4_me
on 2005-02-06 22:30:29 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "squideclipse"
<kevin_quigley@t...> wrote:
>
> I measured the terminal resistance of the E670 -06 motor and found
it
> to read 5.1 ohms. This would place the coil resistance between the
> suffix -03 and -04 versions or half the resistance of the -05. Can I
> assume that if the -05 version needs 152v to achieve full
performance
> at 10 ohms the -06 version would need half the voltage or about 75v
to
> achieve its peak performance?


It is not possible to measure terminal resistance with any accuracy.
Measure the voltage output like Jon told you to do.

Wally

Discussion Thread

squideclipse 2005-02-06 21:41:08 UTC motor running voltage for Electrocraft E670 -06 cnc_4_me 2005-02-06 22:30:29 UTC Re: motor running voltage for Electrocraft E670 -06 Jon Elson 2005-02-07 09:45:17 UTC Re: [CAD_CAM_EDM_DRO] motor running voltage for Electrocraft E670 -06