Re: [CAD_CAM_EDM_DRO] visual mill , rhino , mastercam
Posted by
james owens
on 2000-05-28 10:02:17 UTC
Hi Patrick,
This is the first I have heard of these plugins, do you know if they work with ACAD2000?
Terry
You mention you use acad 14, there is something else you might want to try.
There is an acad plugin called powerGcode that allows you to create 3d
toolpaths in acad and export gcode. I have never used this but I am very
curious about how well it works.
powerGcode $149.
http://www.cadplugins.com/PKSN102832/prod.htm
And
powerGlathe $89.
http://www.cadplugins.com/PKSN102833/prod.htm
[Non-text portions of this message have been removed]
This is the first I have heard of these plugins, do you know if they work with ACAD2000?
Terry
You mention you use acad 14, there is something else you might want to try.
There is an acad plugin called powerGcode that allows you to create 3d
toolpaths in acad and export gcode. I have never used this but I am very
curious about how well it works.
powerGcode $149.
http://www.cadplugins.com/PKSN102832/prod.htm
And
powerGlathe $89.
http://www.cadplugins.com/PKSN102833/prod.htm
[Non-text portions of this message have been removed]
Discussion Thread
james owens
2000-05-28 10:02:17 UTC
Re: [CAD_CAM_EDM_DRO] visual mill , rhino , mastercam
BYRON DAMANIA
2000-05-28 10:08:51 UTC
Re: [CAD_CAM_EDM_DRO] visual mill , rhino , mastercam
Bob Campbell
2000-05-28 12:47:50 UTC
Re: [CAD_CAM_EDM_DRO] visual mill , rhino , mastercam
ptengin@a...
2000-05-28 17:23:45 UTC
Re: [CAD_CAM_EDM_DRO] visual mill , rhino , mastercam