Re: [CAD_CAM_EDM_DRO] Help me gut my BOSS!

Hi Brady,

When I gutted mine I only saved the 110V transformer, some of the big
capacitors in the computer cabinet and the rectifiers out of the
computer cabinet. Everything else went on EBay or for scrap. As I am a
bit limited for room in my workshop I scrapped the computer cabinet and
moved the power cabinet to the side. Everything now fits in the power
cabinet. The computer is a very tight fit. I ended up taking the front
panel off the case to squeeze it in.

Les

PS I also saved the motors out of the tape reader because I just
couldn't throw them away :-)

braidmeister wrote:

>:) Interesting subject title, no?
>
>Anyway...I am getting ready to pull the steppers and clean out the
>CPU cabinet. I am planning on leaving the limit switches, spindle
>power intact...
>
>What should I keep? What gets yanked and put on the Ebay pile???
>
>I am going to set this up for servos & Mach2 & will most likely build
>a new power supply for the servos. I have only jogged the machine
>around (without hitting the limits) and the Y axis lost the magic
>smoke AGAIN...I'm not replacing another one of those transistors
> all the way down in the bottom rear of the cabinet!!! Time to
>gut!
>
>-Brady
>
>
>