Re: [CAD_CAM_EDM_DRO] Ok to have dif. volt. rating for my 3 powersupplies for...

In a message dated 2/13/2005 9:52:40 P.M. Central Standard Time,
mueller914@... writes:

I bought another power supply from Dan @ Camtronics, rated for 80vdc if run
with 220vac......



The "nominal" USA AC-supply is 240 volts, NOT 220, and SOMEtimes it will
measure as high as 260! So, if you power an "80 VDC" supply rated at 220 VAC
IN, the actual output can be on up there close to 100 VDC, and that WILL let
the magic smoke out of the Geckos!!!!!!!!!!!!!!!!


[Non-text portions of this message have been removed]