Re: 10 amps to drive steppers

The +36 supply to the 5 amp controller. Or if you used +24 then that line.
Dan

-----Original Message-----
From: Tim Goldstein <timg@...>
To: CAD_CAM_EDM_DRO@onelist.com <CAD_CAM_EDM_DRO@onelist.com>
Date: Sunday, June 13, 1999 9:48 AM
Subject: Re: [CAD_CAM_EDM_DRO] 10 amps to drive steppers

>From: "Tim Goldstein" <timg@...>
>
>> -----Original Message-----
>> From: Dan Mauch [mailto:dmauch@...]
>> Sent: Sunday, June 13, 1999 7:37 AM
>> To: CAD_CAM_EDM_DRO@onelist.com
>> Subject: Re: [CAD_CAM_EDM_DRO] 10 amps to drive steppers
>>
>>
>> From: "Dan Mauch" <dmauch@...>
>>
>> Let me chime in. On some units that I sold to people that live in very

hot

>> climates like india, I included some thermal cutoff switches. I simply
>> mounted one rated at 135F on each heatsink. I wired them into the
>> Vin to the
>> controller. Thermal switches are available from www.meci.com for about
>> $1.30 ea.
>> Dan
>
>Dan,
>
>Pardon me for being a little thick, but what exactly do you mean by "I

wired

>them into the Vin to the controller."?
>
>
>Tim
>[Denver, CO]
>
>
>------------------------------------------------------------------------
>Looking to expand your world?
>http://www.onelist.com
>ONElist has over 165,000 e-mail communities from which to choose!
>------------------------------------------------------------------------
>welcome to CAD_CAM_EDM_DRO@..., an unmodulated list for the

discussion of shop built systems in the above catagories.

>To Unsubscribe:
> http://www.onelist.com/unsubscribe/CAD_CAM_EDM_DRO
>bill, List Manager
>