CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re:heat treat nomenclature

Posted by Bruce Pigeon
on 2005-03-02 08:48:39 UTC
These learned arts are especially useful when the closest heat treater is
300 miles away. I have trouble getting them to stop by after work to pick
up and return the next day for $15. I am sure that there are many on this
and other lists who are in the same boat. There are a number of books on
EBay on this subject, if anyone is interested in learning more. While what
I have learned may not be perfect but it has served me well for many years.
So take what I pass on with a grain of salt.

Bruce

-------Original Message-------

From: CAD_CAM_EDM_DRO@yahoogroups.com
Date: 03/01/05 21:27:06
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Re:heat treat nomenclature

Hi Wally:
Heating to above the critical temperature "Cherry red" and quenching is
called hardening.
Re-heating a hardened piece to some temperature below (usually substantially
below) the critical temperature and then cooling is called tempering.
Reheating to above the critical temperature and cooling slowly is called
annealing.
This last cycle can also be used for stress relieving or normalizing, but is
normally done at somewhat lower temperatures.
All are heat treating of one sort or another.
Cheers

Marcus





Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec
crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links







.

[Non-text portions of this message have been removed]

Discussion Thread

Marcus and Eva 2005-03-01 19:27:03 UTC Re: [CAD_CAM_EDM_DRO] Re:heat treat nomenclature Bruce Pigeon 2005-03-02 08:48:39 UTC Re: [CAD_CAM_EDM_DRO] Re:heat treat nomenclature John M 2005-03-02 12:49:01 UTC Re: [CAD_CAM_EDM_DRO] Re:heat treat nomenclature turbulatordude 2005-03-02 12:57:13 UTC Re:heat treat nomenclature - Off Topic wthomas@g... 2005-03-05 21:06:39 UTC Re: [CAD_CAM_EDM_DRO] Re:W.E.T.Rails-heat treat