CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Machining reference surfaces on a steel frame.

Posted by Robert Lyman
on 2005-03-10 09:35:34 UTC
In my experience it helps to plan extra thickness into the pads and have the shop grind top and bottom. It is much easier to hold flatness tolerances when the part can be flipped a couple times. Even when the weldment has been normalized it can move a bit.

Rob.

Graham Stabler <eexgs@...> wrote:


Thanks guys, that was just the response I was looking for, I will
heed your advice and go for the seperate legs and also the additional
pads for the leg mounts and rail mounts. I know where I can get
stuff normalized as I did it for my own router bed (which is a eggbox
steel weldment) and it was pretty quick and cheap.

Graham





Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links









---------------------------------
Do you Yahoo!?
Yahoo! Small Business - Try our new resources site!

[Non-text portions of this message have been removed]

Discussion Thread

Graham Stabler 2005-03-10 03:58:00 UTC Machining reference surfaces on a steel frame. R Rogers 2005-03-10 05:11:52 UTC Re: [CAD_CAM_EDM_DRO] Machining reference surfaces on a steel frame. metlmunchr 2005-03-10 08:53:20 UTC Re: Machining reference surfaces on a steel frame. Graham Stabler 2005-03-10 09:03:46 UTC Re: Machining reference surfaces on a steel frame. metlmunchr 2005-03-10 09:10:34 UTC Re: Machining reference surfaces on a steel frame. Robert Lyman 2005-03-10 09:35:34 UTC Re: [CAD_CAM_EDM_DRO] Re: Machining reference surfaces on a steel frame. Graham Stabler 2005-03-10 12:37:12 UTC Re: Machining reference surfaces on a steel frame. Graham Stabler 2005-03-10 12:39:57 UTC Re: Machining reference surfaces on a steel frame.