CAD CAM EDM DRO - Yahoo Group Archive

Re: Bridgeport servo's

Posted by doug98105
on 2005-03-23 18:41:31 UTC
--- In CAD_CAM_EDM_DRO@yahoogroups.com, "Polaraligned"
<polaraligned@o...> wrote:
>
> Seller has a bunch of these motors:
>
> http://cgi.ebay.com/ws/eBayISAPI.dll?
ViewItem&category=78195&item=3878168116&rd=1&ssPageName=WD1V
>
> Anyone have an opinion of these for driving a 9x42 machine?
> Cables are available for the 16 pin connector also.
>
>
> Scott

The price is right, but they may be slightly on the small side for a
9x42 machine.

I have a commercial CNC knee mill that's a tad larger than the
B'port in question. It's motors are identical in appearance except
the torque rating is 40 lb-in instead of the 12.5 of these. Seems
like 20 lb-in would be a good size to shoot for as a minimum on the
B'port.

Discussion Thread

Polaraligned 2005-03-23 17:52:28 UTC Bridgeport servo's R Rogers 2005-03-23 18:29:42 UTC Re: [CAD_CAM_EDM_DRO] Bridgeport servo's doug98105 2005-03-23 18:41:31 UTC Re: Bridgeport servo's Polaraligned 2005-03-24 03:30:50 UTC Re: Bridgeport servo's