CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] rack & pinion

Posted by Dave Smith
on 2005-03-29 22:25:11 UTC
thanks Marcus

I would make them myself but to get the gear cutter (0.5 - 1 module) is a problem. They r always ex Japan or ex Germany which takes weeks. (bear in mind I live in South Africa)

I was hoping to purchase a set and have it within a day or two.

regards

Dave Smith
Cape Town
South Africa

----- Original Message -----
From: Marcus and Eva
To: CAD_CAM_EDM_DRO@yahoogroups.com
Sent: Tuesday, March 29, 2005 5:54 PM
Subject: Re: [CAD_CAM_EDM_DRO] rack & pinion



Hi Dave:
Try Boston Gear, Small Parts Inc, or PIC Design.
All should be on the web, but I don't have URL's.
Alternatively, you can make your own.
It's not difficult, and I can walk you through it if you need me to.
Cheers

Marcus
----- Original Message -----
From: "Dave Smith" <dave@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, March 29, 2005 6:13 AM
Subject: [CAD_CAM_EDM_DRO] rack & pinion


>
> can anybody help? I'm looking for small rack & pinion sets. The rack
should be around 6mm Squ or round, steel or nylon?
>
> any info / website will be appreciated
>
> thanks
>
> regards
>
> Dave Smith
> Cape Town
> South Africa
>
> [Non-text portions of this message have been removed]
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>




Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com

Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@..., timg@...
Moderator: pentam@... indigo_red@... davemucha@... [Moderators]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Yahoo! Groups Links









[Non-text portions of this message have been removed]

Discussion Thread

Dave Smith 2005-03-29 06:14:47 UTC [CAD_CAM_EDM_DRO] rack & pinion Marcus and Eva 2005-03-29 07:54:18 UTC Re: [CAD_CAM_EDM_DRO] rack & pinion Bob Muse 2005-03-29 09:15:33 UTC Re: [CAD_CAM_EDM_DRO] rack & pinion Dave Smith 2005-03-29 22:25:11 UTC Re: [CAD_CAM_EDM_DRO] rack & pinion Dave Smith 2005-03-29 22:25:12 UTC Re: [CAD_CAM_EDM_DRO] rack & pinion Marcus and Eva 2005-03-30 08:16:16 UTC Re: [CAD_CAM_EDM_DRO] rack & pinion