FS: Linear stage

I have a really nice linear stage that has aerotech linear motors,
glass scale, end stops, linear rails, bearings and a table that
mounts to the linear bearings.

This would be an excellent gantry slide for a router or the x axis
for a shop built mill. The aluminum base is about 60 inches long and
23 inches wide. The sliding table is about 20" square. Sizes are
appoximate.

I have some pictures of the table but they are not all that clear as
they are buried behind some stuff in the shop.

Ill take 700.00 for the slide, glass scale and linear motors. This
is a bargain if you can use it.
if you don't want the linear motors ill exchange them for a used
ballscrew that you can adapt. this think is H E A V Y local pickup
would be best but I can ship it anywhere you want.


you can see the pictures at www.grifftek.com/linearslide

I will try and get some better pictures in the next day or so. If
your building a big machine this will be a good start. I believe
this assembly weights 360 lbs fully assembled. I have to remove the
motor assemblies and table to get the weight down to move it around.
I have all the hardware to re assemble it. It just bolts together.

if your interested, you can contact me at bill @ grifftek.com or
call me at 562-477-2054 serious inquires only.

Thanks

Bill Griffin