Re: [CAD_CAM_EDM_DRO] Machinable wax
Posted by
Pete Brown
on 2005-05-03 15:47:40 UTC
I've been using blue (Freeman) machinable wax with great success. You can
machine a mold, and pour the resin right in, or you can machine a master and
copy it using RTV. It holds up very well to either one, and is
self-releasing. It's pretty fun to machine, as well.
You can see a few shots on this page on my site:
http://www.irritatedvowel.com/Railroad/Workshop/CNCAndCasting.aspx
I hae not tried any other machinable waxes; the Freeman has performed well
in everything I've used it for.
Pete
http://www.irritatedVowel.com
machine a mold, and pour the resin right in, or you can machine a master and
copy it using RTV. It holds up very well to either one, and is
self-releasing. It's pretty fun to machine, as well.
You can see a few shots on this page on my site:
http://www.irritatedvowel.com/Railroad/Workshop/CNCAndCasting.aspx
I hae not tried any other machinable waxes; the Freeman has performed well
in everything I've used it for.
Pete
http://www.irritatedVowel.com
----- Original Message -----
From: "tigertwous" <jfisher@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, May 03, 2005 12:33 PM
Subject: [CAD_CAM_EDM_DRO] Machinable wax
> McMaser-Carr has purple and blue machinable wax but their web site
> doesn't mention the difference between the two types, I was wondering
> if there is a hardness difference between the two types? Any one
> know? I'm going to be machining a patteren on my Bridgeport mill and
> then make resin copies of this pattern.
>
> Thanks
>
> Jack Fisher
Discussion Thread
tigertwous
2005-05-03 09:33:40 UTC
Machinable wax
jkbrennan
2005-05-03 10:15:35 UTC
Re: [CAD_CAM_EDM_DRO] Machinable wax
tigertwous
2005-05-03 10:18:07 UTC
Re: Machinable wax
Pete Brown
2005-05-03 15:47:40 UTC
Re: [CAD_CAM_EDM_DRO] Machinable wax
tigertwous
2005-05-04 14:10:26 UTC
Re: Machinable wax