RE: [CAD_CAM_EDM_DRO] Re: 7A, 80VDC 10 microstep drive

> -----Original Message-----
> From: Bob Campbell [mailto:bob@...]
> One other suggestion. I would like to see a driver for 1/4 step mode.
> Microstep past 1/4 step would not help me with my cnc router, as most PC
> system would not be able to create the pulses fast enough to move
> my router

I know that Dan Mauch is working on a 1/4 step board. Last time I asked he
had it up and running, but wanted to tweak the programming on the
microcontroller to get it smoother at low RPM. So, hopefully in the next few
months he will have a kit to offer us in addition to his new full/half step
model and his new 2 amp unit.

Tim
[Denver, CO]