Re: [CAD_CAM_EDM_DRO] Re: Getting 4.2V from a 5V PSU for a Stepper Motor Driver Board
Posted by
Aaron
on 2005-06-13 09:40:26 UTC
Kev Pearce (kevp.com) wrote:
Although it is certainly not refined, I am nearing completion on
building a bipolar microstepping, chopper drive.
You can review the schematic and details here:
http://www.bright.net/~agarb/STMD/STMD.html
Aaron Garber
>I prefer to design and build my own kits rather than simply buy them.Kev,
>Okay mainly from the manufactuers data sheet example circuits but that's
>just my way of doing things.
>The L297/8 seemed a nice pair and easilly available here in the UK (if a
>little pricey).
>
>
Although it is certainly not refined, I am nearing completion on
building a bipolar microstepping, chopper drive.
You can review the schematic and details here:
http://www.bright.net/~agarb/STMD/STMD.html
Aaron Garber
Discussion Thread
Kev Pearce (kevp.com)
2005-06-12 17:36:10 UTC
Getting 4.2V from a 5V PSU for a Stepper Motor Driver Board
caudlet
2005-06-12 21:57:52 UTC
Re: Getting 4.2V from a 5V PSU for a Stepper Motor Driver Board
Kev Pearce (kevp.com)
2005-06-13 07:51:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: Getting 4.2V from a 5V PSU for a Stepper Motor Driver Board
Aaron
2005-06-13 09:40:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: Getting 4.2V from a 5V PSU for a Stepper Motor Driver Board
Bob Cohen
2005-06-14 07:39:08 UTC
RE: [CAD_CAM_EDM_DRO] Getting 4.2V from a 5V PSU for a Stepper Motor Driver Board