Re: [CAD_CAM_EDM_DRO] STEPSTER: how many use it and are you aware of any particular problems

Hi, years back i used it, before i had anything else. I dont remember any
problems other than the few codes supported.
I am sure if he had not passed on more of the codes would have been
supported. i have recommended that code to a number of people and no
complaints. cul brian f.

----- Original Message -----
From: "D. Daniel McGlothin" <ddm@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, July 19, 2005 11:36 AM
Subject: [CAD_CAM_EDM_DRO] STEPSTER: how many use it and are you aware of
any particular problems


> Hi,
>
> I'm interested in how many people might be using Kevin Carroll's STEPSTER
> (or SUPER STEPPER).
>
> I'm also interested in actual user's impressions of any particular
> shortcomings or problem areas experienced with STEPSTER.
>
> I am not particularly interested in comparisons to other CNC software
> packages, although if you are aware of free, open sourced software (other
> than EMC) you might mention that.
>
> The purpose for these questions is as follows: I'm considering using
> STEPSTER code as a basis of an embedded 3-axis stepper controller whose
> programming interface is G-Codes sufficient to process Gerber and Excellon
> files. Before I would embark on this project, I thought I'd see if there
> were any operational problems I should be aware of that might be "fixable"
> in the porting of the code.
>
> Daniel
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
[Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>