Restored/converted Denford ORAC lathe for sale
Posted by
bear_cnc
on 2005-09-13 00:45:21 UTC
Dear All,
At long last I have finished modernising my two Denford Orac lathes.
I'll keep one but the other one is up for grabs now. Here are the
details:
Denford Orac CNC lathe, ex college workshop.
18" between centres, 4" centre height, 2.5" over crosslide. Roughly
Myford ML7 size.
Tailstock MT2, headstock MT3. 4" 3-jaw chuck, spare backplate (taper
mount).
Quickchange toolpost with 5 toolholders.
Software: TurboCNC 4.01 running on MS-DOS Compaq laptop (included). To
be programmed in G and M code.
Completely modernised control system, but still using existing stepper
motors and drives, Digispeed spindle speed control. Allows
threadcutting.
In excellent condition, has had little use. Can be seen working.
All manuals included.
Can send photo or further info if needed.
Machine is located in South Wales / UK and needs to be picked up from
there.
Let me know if anybody is interested.
Best regards,
Thomas.
At long last I have finished modernising my two Denford Orac lathes.
I'll keep one but the other one is up for grabs now. Here are the
details:
Denford Orac CNC lathe, ex college workshop.
18" between centres, 4" centre height, 2.5" over crosslide. Roughly
Myford ML7 size.
Tailstock MT2, headstock MT3. 4" 3-jaw chuck, spare backplate (taper
mount).
Quickchange toolpost with 5 toolholders.
Software: TurboCNC 4.01 running on MS-DOS Compaq laptop (included). To
be programmed in G and M code.
Completely modernised control system, but still using existing stepper
motors and drives, Digispeed spindle speed control. Allows
threadcutting.
In excellent condition, has had little use. Can be seen working.
All manuals included.
Can send photo or further info if needed.
Machine is located in South Wales / UK and needs to be picked up from
there.
Let me know if anybody is interested.
Best regards,
Thomas.