is there an engineer in the house ?
Posted by
Bill Johnson
on 2005-11-13 18:26:53 UTC
i am thinking of trying a belt drive system on my cnc router the
pulley that will mount on the shaft of the stepper motor is
(Width, .87" OD, 10 Teeth) with a belt going to a Width, 3.80" OD, 60
Teeth on the same shaft put a Width, .87" OD, 10 Teeth that will drive
the gantry what effect will that have on a 200 oz/inch stepper motor ?
versus a 10 threads per inch screw and ballnut driving the same
gantry ?
pulley that will mount on the shaft of the stepper motor is
(Width, .87" OD, 10 Teeth) with a belt going to a Width, 3.80" OD, 60
Teeth on the same shaft put a Width, .87" OD, 10 Teeth that will drive
the gantry what effect will that have on a 200 oz/inch stepper motor ?
versus a 10 threads per inch screw and ballnut driving the same
gantry ?