Re: [CAD_CAM_EDM_DRO] Re: proximity sensors

Glad you got it working.
Jim

----- Original Message -----
From: "corey94945" <vandal968@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Saturday, November 19, 2005 11:39 AM
Subject: [CAD_CAM_EDM_DRO] Re: proximity sensors


> Jim,
> SWEET! just got one of the switches working. Looks like it wants BLU
> to GRND and BLK to signal. Of course, all the black wires coming off
> the prox switches are common somewhere inside the machine, so I can't
> currently get it to work with more than one switch at a time, but I'm
> heading in the right direction. Thanks for the help.
>
> c
>
>
> --- In CAD_CAM_EDM_DRO@yahoogroups.com, "JCullins"
> <james_cullins@s...> wrote:
>>
>> Cory,
>> The limit / home input needs to brought to ground to activate the
>> circuit, so I would connected it like this
>> connect the BLU wire to the switch input on the center pin of the screw
>> terminal. and the BLK on the gnd terminal. If that does not work
> reverse
>> them and try it. I have never tried to use the two wire sensors.
>> Bob Campbell uses a 3 wire sensor form Automation Direct I believe.
> I use
>> roller type micro switch.
>> Jim
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> Post Messages: CAD_CAM_EDM_DRO@yahoogroups.com
>
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...,
> timg@...
> Moderator: pentam@... indigo_red@... davemucha@...
> [Moderators]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this to be a
> sister site to the CCED group, as many of the same members are there, for
> OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> bill
> List Mom
> List Owner
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>